UltraSorb Floorsweep

30 Litre (10kg) Bag

Spill type:  Absorbs oils, fuels, coolants, degreaser, mild acids & caustics, paints, solvents and most liquids.

Application: Use on hard surfaces wherever oils, fuels, chemicals & liquids are stored, handled and spilt.

Absorbent capacity:  Up to 30 litres per bag.

• Ideal for road side spills, service stations, maintenance workshops, parking areas, re-fueling areas, paint & panel shops and automotive workshops.  
• Economically priced floorsweep for those occasional spills.
• UltraSorb™ is ideal for placing on and around a spill to ‘solidify’ and absorb and then swept up and recovered.
• Absorbs and cleans up most oils, fuels, solvents, degreasers, mild acids, bases, paints, inks, dyes and other water based liquids on contact.
• Able to absorb up to 3 times its own weight in liquid.
• Comprising of a blend of cellulose based organics,  UltraSorb™ is made from a renewable resource.
• High absorbency to weight ratio = lower transport & disposal costs.
• Fast wicking action allows quick clean up, reduces potential slip hazards and improves safety in the workplace.
• Non-abrasive, non-toxic and non-leaching.
• Can be composted and does not have to go to landfill.
• Does a superior job leaving surfaces dryer and less slippery.
• Does NOT contain crystalline silica (Classified Group 1, Carcinogenic to humans.) 

UltraSorb™ can be ordered by the bag or pallet (70 bags per pallet)

Shipping weight (bag): 10 kg

Shipping weight (pallet): 700 kg 

Shipping dimensions (bag): 670mm(L) x 450mm(W) x 90mm(H)

Manufactured in Australia

NOTES: 

• Absorbent capacity will vary depending on liquid viscosity, specific gravity and temperature. 
• Budgetsorb is compatible with, and absorbs mild acids and bases. The suitability with a specific chemical should be confirmed by referencing the MSDS, a compatibility chart or sample testing. We can provide samples as required.
• Absorbents retain the characteristics of the absorbed liquid. Appropriate PPE should be worn and disposal of used absorbents should be in accordance with local regulations.